| 0 |
Solution ground connected
|
| 1 |
Ruggedized high temperature pH tip, 20 ºC to 105 ºC (68 ºF to 221 ºF); not recommended below 50 ºC (122 ºF)
|
| 2 |
Low pH glass (suggested below 5 °C or 40 °F)
|
| 3 |
High pH tip, for applications where 10 pH to 14 pH is common; 10 ºC to 105 ºC (50 ºF to 221 ºF)
|
| 4P |
Platinum ORP tip
|
| 4G |
Gold ORP tip
|
| 5 |
Extra rugged tip, 20 ºC to 130 ºC (68 ºF to 266 ºF), 0 pH to 12 pH. Requires option -12 for applications over 90 °C (194 °F).
|
| 6 |
Flat glass tip, 0 ºC to 90 ºC (32 ºF to 194 ºF), 0 pH to 12 pH, no flutes
|
| 7 |
Double junction reference; to inhibit ion contamination from the process
|
| 8 |
Plastic reference; for long life & hot applications over 80 ºC (176 ºF)
|
| 12 |
PVDF body, maximum 130 ºC (266 ºF); limited by maximum temperature of pH glass
|
| 17 |
Hytec II porous junction; suggested for strong caustic or acid applications
|
|
21 |
CPVC one piece flow cell/insertion fitting, 1 inch slip
|
|
22 |
PVDF flow cell, 1 inch FNPT
|
|
23 |
316SS flow cell, 1 inch FNPT
|
|
24 |
CPVC flow cell, 1 inch FNPT
|
|
25 |
Slotted ½ inch NPT close-nipple for submersion mounting
|
|
26 |
CPVC quick connect insertion fitting, 1 inch MNPT, to 414 kPa (60 psi) at 90 ºC (194 ºF)
|
|
28 |
SS quick connect insertion fitting, 1 inch MNPT, to 690 kPa (100 ps) i at 150 ºC (302 ºF)
|
| |
31 |
Temperature compensator, 3K ohm
|
| |
32 |
Temperature compensator, 100 ohm RTD
|
| |
33 |
Temperature compensator, micro TC (for use with 655)
|
| |
33P |
Temperature compensator, micro TC with pin jacks (for use with 655-6)
|
| |
34 |
Temperature compensator, 1000 ohm RTD (for use with 210-P, 655-T, 653, 653-9)
|
| |
34P |
Temperature compensator, 1000 ohm RTD with pin jacks (for use with 655-T-6, 650)
|
| | |
71 |
Short cable, length less than 1.5 m (5 ft)
|
| | |
72 |
Long cable, length greater than 1.5 m (5 ft), maximum length 30 m (100 ft)
|
| | |
77 |
Anti-coating treatment
|
| | |
89 |
Stainless steel tag
|
| | |
93 |
Colored buffer 6-pack: 4, 7 & 10. For pure water see P/N A1100220-6P
|
| | |
94 |
Buffer 4.0 pH, 500 mL bottle, red. For pure water see P/N A1100216
|
| | |
95 |
Buffer 7.0 pH, 500 mL bottle, green. For pure water see P/N A1100217
|
| | |
96 |
Buffer 10.0 pH, 500 mL bottle, blue. For pure water see P/N A1100218
|
