Model orion: Thermo Orion - Process Products
 
Canadian National Distributor of Orion Process Products since 1981
Consumables are stocked in Canada!
Application Expertise, Technical Support and Customer Service are all available from our friendly staff in Canada.
All monitors are factory liquid tested by our Service Staff to meet QC standards before it is shipped to you because ...
Service, Repair and Warranty are all done right here in Canada to help minimize any downtime.
MSDS paperwork is bilingual to meet Canadian laws.
WHMIS labelling is upgraded to meet the Canadian Transportation of Dangerous Goods Act.
Specializing in the following measurements:
Sodium / Dissolved Oxygen / Hydrazine / Ammonia / Fast QC / Silica / Chloride /
Oxygen Scavenger / Calcium / Steam Sampler / Fluoride / Chlorine / pH / ORP / Conductivity
Click on a Model Number below to learn more.
2117HL High-Level Chloride Monitor
Used to measure chloride balances in food and beverages as well as stress corrosion conditions. Measures from 10 to 1000 ppm.
2111LL Low-Level Sodium (parts per trillion) Monitor
Measures sodium in the 0.001 ppb to 10 ppm range. Sodium made simple. Innovative patented technology. DIPA reagent vaporizes to nothing, waste disposal reduced. Replaces 1811EL.
2111-XD General Use Sodium Monitor with DIPA.
Used for 0.1 ppb to 10 ppm applications, where really low sodium levels are not encountered. Innovative technology DIPA reagent and easy to use. Replaces 1811LL.
2111-XC Cation Sodium Monitor
Measures in the highly acidic cation exchanger outlet. Used in the 1.0 ppb to 200 ppm range. Used for Cation Exchanger regeneration made easy. Replaces 1811AO.
2111-XA Sodium Monitor
Used where low ammonium hydroxide reagent cost is more important than low end ammonia ion error. Detection limit of 0.3 ppb to 200 ppm sodium.
2230 Silica Monitor
Monitor measures ppb to ppm levels with single or multiple channels, easy to use with walk-away automation for routine operations. Low reagent consumption and smallest total system footprint on the market today.
On-line Ultra Pure Water pH Monitor consists of:
2102pH Pure Water pH Analyzer
2001SC Ross pH sensor the high performance Ross Technology used in 2111LL.
On-line Ultra Pure Water Conductivity Monitor
2104CDD Dual Conductivity
1816DO Low-Level Dissolved Oxygen Monitor
Monitor measures ppb level oxygen in steam and water circuits, can be used as a portable.
2109XP Fluoride Monitor
Used for safe drinking water 1.4 to 2.4 ppm. Recognized EPA method for fluoride using an ion selective electrode (ISE). Measures fluoride in the 10 ppb to 200 ppm range.
2110XP Ammonia Monitor - Measures ammonia in the 0.1-10 ppm range in pure water.
2120XP Calcium Montitor - Used for Zeolite softener regeneration made easy. Measures calcium in the 25 ppb to 10 ppm range.
2117XP Chloride Monitor - Used to check corrosion conditions. Measure from 0.1 to 100 ppm.
2118XP Oxygen Scavenger Monitor - Assures sufficient Oxygen Scavener in Boiler Water circuits.
2100-AS FAST QC Sampler - Allows check samples, calibration standards, other location samples to be analyzed on existing monitors.
2100-AS Low Level Verification System - with Dynamic Calibrator verifies with on line dynamic dilution.
2100-AS 1803 Steam Sampler - Sample high presuure steam up to 3030 psi. All mechanical needs no electiricity. Can be used in hazardous locations.
|
